BSDPORTAL.RU

На этом сайте обсуждаются вопросы использования ОС FreeBSD
 Портал  •  Статьи  •  Форум  •  Wiki  •  Поиск  •  FAQ  •  Обои  •   Официальная документация  •  Новые темы 

Часовой пояс: UTC + 4 часа




Начать новую тему Ответить на тему  [ Сообщений: 2 ] 
Автор Сообщение
 Заголовок сообщения: Xorg + intel
СообщениеДобавлено: Чт 30 июн, 2016 9:09 am 
Не в сети

Зарегистрирован: Чт 30 июн, 2016 7:27 am
Сообщения: 1
Все доброго времени суток.
Собрал Xorg из портов.
сделал Xorg -configure
X -config /root/Xorg.conf.new
в результате, темный экран, сетки нет.
Поиграл с MODES (добавил строки в xorg.conf.new) результат тот же
Ошибок в логе - нет, или я не там смотрю. Подскажите в чем может быть проблема?

xorg.conf.new
Код:
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/local/lib/xorg/modules"
        FontPath     "/usr/local/share/fonts/misc/"
        FontPath     "/usr/local/share/fonts/TTF/"
        FontPath     "/usr/local/share/fonts/OTF/"
        FontPath     "/usr/local/share/fonts/Type1/"
        FontPath     "/usr/local/share/fonts/100dpi/"
        FontPath     "/usr/local/share/fonts/75dpi/"
EndSection

Section "Module"
        Load  "glx"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/sysmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "AccelMethod"               # <str>
        #Option     "Backlight"                 # <str>
        #Option     "DRI"                       # <str>
        #Option     "ColorKey"                  # <i>
        #Option     "VideoKey"                  # <i>
        #Option     "Tiling"                    # [<bool>]
        #Option     "LinearFramebuffer"         # [<bool>]
        #Option     "SwapbuffersWait"           # [<bool>]
        #Option     "TripleBuffer"              # [<bool>]
        #Option     "XvPreferOverlay"           # [<bool>]
        #Option     "HotPlug"                   # [<bool>]
        #Option     "ReprobeOutputs"            # [<bool>]
        #Option     "XvMC"                      # [<bool>]
        #Option     "ZaphodHeads"               # <str>
        #Option     "TearFree"                  # [<bool>]
        #Option     "PerCrtcPixmaps"            # [<bool>]
        #Option     "FallbackDebug"             # [<bool>]
        #Option     "DebugFlushBatches"         # [<bool>]
        #Option     "DebugFlushCaches"          # [<bool>]
        #Option     "DebugWait"                 # [<bool>]
        #Option     "BufferCache"               # [<bool>]
        Identifier  "Card0"
        Driver      "intel"
        BusID       "PCI:0:2:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
                Modes     "1024x768"
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes     "1024x768"
        EndSubSection
EndSection

dmesg
Код:
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 03:51:29 UTC 2016
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU          430  @ 1.80GHz (1800.01-MHz 686-class CPU)
  Origin="GenuineIntel"  Id=0x10661  Family=0x6  Model=0x16  Stepping=1
  Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 536870912 (512 MB)
avail memory = 490016768 (467 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <AAMMII OEMAPIC >
random: <Software, Yarrow> initialized
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc0fcc580, 0) error 19
acpi0: <AAMMII OEMRSDTA> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xfea80000-0xfeafffff,0xd0000000-0xdfffffff,0xfea40000-0xfea7ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7932k stolen memory
vgapci0: Boot video device
hdac0: <Intel 82801G HDA Controller> mem 0xfea38000-0xfea3bfff irq 16 at device 27.0 on pci0
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xd880-0xd89f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xd800-0xd81f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd480-0xd49f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xd400-0xd41f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfea37c00-0xfea37fff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 5.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:19:21:3e:49:97
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xcb000-0xcbfff pnpid ORM0000 on isa0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
Timecounters tick every 1.000 msec
hdacc0: <Sigmatel STAC9221_A2 HDA CODEC> at cad 0 on hdac0
hdaa0: <Sigmatel STAC9221_A2 Audio Function Group> at nid 1 on hdacc0
pcm0: <Sigmatel STAC9221_A2 (Analog 5.1+HP/2.0)> at nid 13,12,15,10 and 11,21 on hdaa0
pcm1: <Sigmatel STAC9221_A2 (Rear Digital)> at nid 16 on hdaa0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD800AAJS-00B4A0 01.03A01> ATA8-ACS SATA 2.x device
ada0: Serial Number WD-WCAT20144128
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors)
ada0: Previously was known as ad4
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <Optiarc DVD RW AD-5200A 1.04> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Timecounter "TSC" frequency 1800013554 Hz quality 1000
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Trying to mount root from ufs:/dev/ada0p2 [rw]...
ugen1.2: <Logitech> at usbus1
rl0: link state changed to DOWN
rl0: link state changed to UP
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Intel i945G> on vgapci0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xdb
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xdb
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xdb
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xdb
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xdb
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xdb
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xdb
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] failed to find VBIOS tables
drmn0: taking over the fictitious range 0xd0000000-0xe0000000
info: [drm] initialized overlay support
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0

Xorg.0.log
Код:
root@Free:/usr/ports/x11/xorg # cat /var/log/Xorg.0.log
[  7005.384]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[  7005.385] X Protocol Version 11, Revision 0
[  7005.385] Build Operating System: FreeBSD 10.3-RELEASE i386
[  7005.385] Current Operating System: FreeBSD Free 10.3-RELEASE FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 03:51:29 UTC 2016     root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
[  7005.385] Build Date: 25 June 2016  07:15:27AM
[  7005.385]
[  7005.385] Current version of pixman: 0.34.0
[  7005.385]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  7005.385] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  7005.385] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 30 02:46:06 2016
[  7005.385] (++) Using config file: "/root/xorg.conf.new"
[  7005.386] (==) ServerLayout "X.org Configured"
[  7005.386] (**) |-->Screen "Screen0" (0)
[  7005.386] (**) |   |-->Monitor "Monitor0"
[  7005.386] (**) |   |-->Device "Card0"
[  7005.386] (**) |-->Input Device "Mouse0"
[  7005.386] (**) |-->Input Device "Keyboard0"
[  7005.386] (==) Automatically adding devices
[  7005.386] (==) Automatically enabling devices
[  7005.386] (==) Not automatically adding GPU devices
[  7005.386] (**) FontPath set to:
        /usr/local/share/fonts/misc/,
        /usr/local/share/fonts/TTF/,
        /usr/local/share/fonts/OTF/,
        /usr/local/share/fonts/Type1/,
        /usr/local/share/fonts/100dpi/,
        /usr/local/share/fonts/75dpi/,
        /usr/local/share/fonts/misc/,
        /usr/local/share/fonts/TTF/,
        /usr/local/share/fonts/OTF/,
        /usr/local/share/fonts/Type1/,
        /usr/local/share/fonts/100dpi/,
        /usr/local/share/fonts/75dpi/
[  7005.386] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[  7005.386] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[  7005.386] (WW) Disabling Mouse0
[  7005.386] (WW) Disabling Keyboard0
[  7005.386] (II) Loader magic: 0x8232070
[  7005.386] (II) Module ABI versions:
[  7005.386]    X.Org ANSI C Emulation: 0.4
[  7005.386]    X.Org Video Driver: 19.0
[  7005.386]    X.Org XInput driver : 21.0
[  7005.386]    X.Org Server Extension : 9.0
[  7005.387] (--) PCI:*(0:0:2:0) 8086:2772:1019:2633 rev 2, Mem @ 0xfea80000/524288, 0xd0000000/268435456, 0xfea40000/262144, I/O @ 0x0000dc00/8, BIOS @ 0x????????/65536
[  7005.387] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  7005.387] (II) LoadModule: "glx"
[  7005.387] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[  7005.389] (II) Module glx: vendor="X.Org Foundation"
[  7005.390]    compiled for 1.17.4, module version = 1.0.0
[  7005.390]    ABI class: X.Org Server Extension, version 9.0
[  7005.390] (==) AIGLX enabled
[  7005.390] (II) LoadModule: "intel"
[  7005.390] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[  7005.390] (II) Module intel: vendor="X.Org Foundation"
[  7005.390]    compiled for 1.17.4, module version = 2.21.15
[  7005.390]    Module class: X.Org Video Driver
[  7005.390]    ABI class: X.Org Video Driver, version 19.0
[  7005.390] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
        HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
        HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
        HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
        HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[  7005.391] (--) Using syscons driver with X support (version 2.0)
[  7005.391] (--) using VT number 9

[  7005.405] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  7005.406] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  7005.406] (==) intel(0): RGB weight 888
[  7005.406] (==) intel(0): Default visual is TrueColor
[  7005.406] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[  7005.406] (**) intel(0): Relaxed fencing disabled
[  7005.407] (**) intel(0): Wait on SwapBuffers? enabled
[  7005.407] (**) intel(0): Triple buffering? enabled
[  7005.407] (**) intel(0): Framebuffer tiled
[  7005.407] (**) intel(0): Pixmaps tiled
[  7005.407] (**) intel(0): 3D buffers tiled
[  7005.407] (**) intel(0): SwapBuffers wait enabled
[  7005.407] (==) intel(0): video overlay key set to 0x101fe
[  7005.451] (II) intel(0): Output VGA1 using monitor section Monitor0
[  7005.486] (II) intel(0): EDID for output VGA1
[  7005.486] (II) intel(0): Manufacturer: ACR  Model: ad46  Serial#: 2171671030
[  7005.486] (II) intel(0): Year: 2008  Week: 17
[  7005.486] (II) intel(0): EDID Version: 1.3
[  7005.486] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[  7005.487] (II) intel(0): Sync:  Separate
[  7005.487] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[  7005.487] (II) intel(0): Gamma: 2.20
[  7005.487] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[  7005.487] (II) intel(0): First detailed timing is preferred mode
[  7005.487] (II) intel(0): redX: 0.640 redY: 0.349   greenX: 0.284 greenY: 0.617
[  7005.488] (II) intel(0): blueX: 0.142 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
[  7005.488] (II) intel(0): Supported established timings:
[  7005.488] (II) intel(0): 720x400@70Hz
[  7005.488] (II) intel(0): 640x480@60Hz
[  7005.488] (II) intel(0): 640x480@67Hz
[  7005.488] (II) intel(0): 640x480@72Hz
[  7005.488] (II) intel(0): 640x480@75Hz
[  7005.488] (II) intel(0): 800x600@56Hz
[  7005.488] (II) intel(0): 800x600@60Hz
[  7005.489] (II) intel(0): 800x600@72Hz
[  7005.489] (II) intel(0): 800x600@75Hz
[  7005.489] (II) intel(0): 832x624@75Hz
[  7005.489] (II) intel(0): 1024x768@60Hz
[  7005.489] (II) intel(0): 1024x768@70Hz
[  7005.489] (II) intel(0): 1024x768@75Hz
[  7005.489] (II) intel(0): 1280x1024@75Hz
[  7005.489] (II) intel(0): Manufacturer's mask: 0
[  7005.489] (II) intel(0): Supported detailed timing:
[  7005.490] (II) intel(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[  7005.490] (II) intel(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[  7005.490] (II) intel(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[  7005.490] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz
[  7005.490] (II) intel(0): Serial No: L460C260404D
[  7005.490] (II) intel(0): Monitor name: AL1716
[  7005.490] (II) intel(0): EDID (in hex):
[  7005.491] (II) intel(0):     00ffffffffffff00047246adf6117181
[  7005.491] (II) intel(0):     1112010308221b78eadc55a359489e24
[  7005.491] (II) intel(0):     115054bfef0001010101010101010101
[  7005.491] (II) intel(0):     010101010101302a009851002a403070
[  7005.491] (II) intel(0):     1300520e1100001e000000fd00384b1e
[  7005.491] (II) intel(0):     530e000a202020202020000000ff004c
[  7005.491] (II) intel(0):     34363043323630343034440a000000fc
[  7005.491] (II) intel(0):     00414c313731360a20202020202000ac
[  7005.491] (II) intel(0): Printing probed modes for output VGA1
[  7005.492] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz UeP)
[  7005.492] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[  7005.492] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  7005.492] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  7005.492] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  7005.492] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[  7005.492] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  7005.493] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  7005.493] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  7005.493] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  7005.493] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  7005.493] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[  7005.493] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[  7005.494] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  7005.494] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  7005.494] (II) intel(0): Output VGA1 connected
[  7005.494] (II) intel(0): Using user preference for initial modes
[  7005.494] (II) intel(0): Output VGA1 using initial mode 1024x768
[  7005.494] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  7005.494] (II) intel(0): Kernel page flipping support detected, enabling
[  7005.495] (==) intel(0): DPI set to (96, 96)
[  7005.495] (II) Loading sub module "fb"
[  7005.495] (II) LoadModule: "fb"
[  7005.495] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[  7005.496] (II) Module fb: vendor="X.Org Foundation"
[  7005.496]    compiled for 1.17.4, module version = 1.0.0
[  7005.496]    ABI class: X.Org ANSI C Emulation, version 0.4
[  7005.496] (II) Loading sub module "dri2"
[  7005.496] (II) LoadModule: "dri2"
[  7005.496] (II) Module "dri2" already built-in
[  7005.497] (==) Depth 24 pixmap format is 32 bpp
[  7005.497] (II) intel(0): [DRI2] Setup complete
[  7005.497] (II) intel(0): [DRI2]   DRI driver: i915
[  7005.497] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[  7005.497] (II) UXA(0): Driver registered support for the following operations:
[  7005.497] (II)         solid
[  7005.498] (II)         copy
[  7005.498] (II)         composite (RENDER acceleration)
[  7005.498] (II)         put_image
[  7005.498] (II)         get_image
[  7005.498] (==) intel(0): Backing store enabled
[  7005.498] (==) intel(0): Silken mouse enabled
[  7005.498] (II) intel(0): Initializing HW Cursor
[  7005.498] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  7005.499] (==) intel(0): DPMS enabled
[  7005.499] (==) intel(0): Intel XvMC decoder disabled
[  7005.499] (II) intel(0): Set up textured video
[  7005.499] (II) intel(0): Set up overlay video
[  7005.499] (II) intel(0): direct rendering: DRI2 Enabled
[  7005.582] (--) RandR disabled
[  7005.589] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  7005.589] (II) AIGLX: enabled GLX_ARB_create_context
[  7005.589] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  7005.589] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[  7005.589] (II) AIGLX: enabled GLX_INTEL_swap_event
[  7005.590] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  7005.590] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  7005.590] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  7005.590] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  7005.590] (II) AIGLX: Loaded and initialized i915
[  7005.590] (II) GLX: Initialized DRI2 GL provider for screen 0
[  7005.591] (II) intel(0): Setting screen physical size to 270 x 203
[  7005.877] (II) config/devd: probing input devices...
[  7005.877] (II) config/devd: adding input device (null) (/dev/kbdmux)
[  7005.878] (II) LoadModule: "kbd"
[  7005.878] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[  7005.878] (II) Module kbd: vendor="X.Org Foundation"
[  7005.879]    compiled for 1.17.4, module version = 1.8.1
[  7005.879]    Module class: X.Org XInput Driver
[  7005.879]    ABI class: X.Org XInput driver, version 21.0
[  7005.879] (II) Using input driver 'kbd' for 'kbdmux'
[  7005.879] (**) kbdmux: always reports core events
[  7005.879] (**) kbdmux: always reports core events
[  7005.880] (**) Option "Protocol" "standard"
[  7005.880] (**) Option "XkbRules" "base"
[  7005.880] (**) Option "XkbModel" "pc105"
[  7005.880] (**) Option "XkbLayout" "us"
[  7005.880] (**) Option "config_info" "devd:kbdmux"
[  7005.881] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6)
[  7005.899] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[  7005.899] (II) config/devd: adding input device (null) (/dev/sysmouse)
[  7005.899] (II) LoadModule: "mouse"
[  7005.900] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[  7005.900] (II) Module mouse: vendor="X.Org Foundation"
[  7005.900]    compiled for 1.17.4, module version = 1.9.1
[  7005.900]    Module class: X.Org XInput Driver
[  7005.901]    ABI class: X.Org XInput driver, version 21.0
[  7005.901] (II) Using input driver 'mouse' for 'sysmouse'
[  7005.901] (**) sysmouse: always reports core events
[  7005.901] (**) Option "Device" "/dev/sysmouse"
[  7005.901] (==) sysmouse: Protocol: "Auto"
[  7005.901] (**) sysmouse: always reports core events
[  7005.902] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[  7005.902] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[  7005.902] (**) sysmouse: Buttons: 5
[  7005.902] (**) Option "config_info" "devd:sysmouse"
[  7005.902] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7)
[  7005.902] (**) sysmouse: (accel) keeping acceleration scheme 1
[  7005.903] (**) sysmouse: (accel) acceleration profile 0
[  7005.903] (**) sysmouse: (accel) acceleration factor: 2.000
[  7005.903] (**) sysmouse: (accel) acceleration threshold: 4
[  7005.903] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[  7005.903] (II) sysmouse: SetupAuto: protocol is SysMouse
[  7005.903] (II) config/devd: device /dev/ums0 already opened
[  7021.722] (II) AIGLX: Suspending AIGLX clients for VT switch
[  7027.278] (II) config/devd: terminating backend...
[  7027.278] (II) UnloadModule: "mouse"
[  7027.278] (II) UnloadModule: "kbd"
[  7027.286] (II) Server terminated successfully (0). Closing log file.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: Xorg + intel
СообщениеДобавлено: Чт 30 июн, 2016 1:05 pm 
Не в сети
Модератор

Зарегистрирован: Сб 11 сен, 2004 6:33 am
Сообщения: 5195
Откуда: Москва
А там и не должно быть сетки. Для сетки был какой-то ключ, типа -classic или -legacy вспомнил, -retro. Ошибок у вас вроде нет.

viewtopic.php?t=20514
viewtopic.php?t=20541


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
Начать новую тему Ответить на тему  [ Сообщений: 2 ] 

Часовой пояс: UTC + 4 часа


Кто сейчас на конференции

Зарегистрированные пользователи: Bing [Bot], Google [Bot], Google Feedfetcher


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Создано на основе phpBB® Forum Software © phpBB Group
Русская поддержка phpBB
Яндекс.Метрика