Зарегистрирован: Чт 30 июн, 2016 7:27 am Сообщения: 1
|
Все доброго времени суток. Собрал Xorg из портов. сделал Xorg -configure X -config /root/Xorg.conf.new в результате, темный экран, сетки нет. Поиграл с MODES (добавил строки в xorg.conf.new) результат тот же Ошибок в логе - нет, или я не там смотрю. Подскажите в чем может быть проблема?

xorg.conf.new
Код: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection
Section "Files" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/share/fonts/misc/" FontPath "/usr/local/share/fonts/TTF/" FontPath "/usr/local/share/fonts/OTF/" FontPath "/usr/local/share/fonts/Type1/" FontPath "/usr/local/share/fonts/100dpi/" FontPath "/usr/local/share/fonts/75dpi/" EndSection
Section "Module" Load "glx" EndSection
Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection
Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5 6 7" EndSection
Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection
Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "AccelMethod" # <str> #Option "Backlight" # <str> #Option "DRI" # <str> #Option "ColorKey" # <i> #Option "VideoKey" # <i> #Option "Tiling" # [<bool>] #Option "LinearFramebuffer" # [<bool>] #Option "SwapbuffersWait" # [<bool>] #Option "TripleBuffer" # [<bool>] #Option "XvPreferOverlay" # [<bool>] #Option "HotPlug" # [<bool>] #Option "ReprobeOutputs" # [<bool>] #Option "XvMC" # [<bool>] #Option "ZaphodHeads" # <str> #Option "TearFree" # [<bool>] #Option "PerCrtcPixmaps" # [<bool>] #Option "FallbackDebug" # [<bool>] #Option "DebugFlushBatches" # [<bool>] #Option "DebugFlushCaches" # [<bool>] #Option "DebugWait" # [<bool>] #Option "BufferCache" # [<bool>] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection
Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" EndSubSection EndSection

dmesg
Код: Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 03:51:29 UTC 2016 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 VT(vga): resolution 640x480 CPU: Intel(R) Celeron(R) CPU 430 @ 1.80GHz (1800.01-MHz 686-class CPU) Origin="GenuineIntel" Id=0x10661 Family=0x6 Model=0x16 Stepping=1 Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 536870912 (512 MB) avail memory = 490016768 (467 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <AAMMII OEMAPIC > random: <Software, Yarrow> initialized ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 module_register_init: MOD_LOAD (vesa, 0xc0fcc580, 0) error 19 acpi0: <AAMMII OEMRSDTA> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xfea80000-0xfeafffff,0xd0000000-0xdfffffff,0xfea40000-0xfea7ffff irq 16 at device 2.0 on pci0 agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device hdac0: <Intel 82801G HDA Controller> mem 0xfea38000-0xfea3bfff irq 16 at device 27.0 on pci0 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xd880-0xd89f irq 23 at device 29.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xd800-0xd81f irq 19 at device 29.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xd480-0xd49f irq 18 at device 29.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xd400-0xd41f irq 16 at device 29.3 on pci0 uhci3: LegSup = 0x2f00 usbus3 on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfea37c00-0xfea37fff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 5.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:19:21:3e:49:97 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 atapci1: <Intel ICH7 SATA300 controller> port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f irq 19 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci1 ata3: <ATA channel> at channel 1 on atapci1 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcb000-0xcbfff pnpid ORM0000 on isa0 random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 Timecounters tick every 1.000 msec hdacc0: <Sigmatel STAC9221_A2 HDA CODEC> at cad 0 on hdac0 hdaa0: <Sigmatel STAC9221_A2 Audio Function Group> at nid 1 on hdacc0 pcm0: <Sigmatel STAC9221_A2 (Analog 5.1+HP/2.0)> at nid 13,12,15,10 and 11,21 on hdaa0 pcm1: <Sigmatel STAC9221_A2 (Rear Digital)> at nid 16 on hdaa0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 usbus4: 480Mbps High Speed USB v2.0 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered ada0 at ata2 bus 0 scbus1 target 0 lun 0 ada0: <WDC WD800AAJS-00B4A0 01.03A01> ATA8-ACS SATA 2.x device ada0: Serial Number WD-WCAT20144128 ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors) ada0: Previously was known as ad4 cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: <Optiarc DVD RW AD-5200A 1.04> Removable CD-ROM SCSI device cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present Timecounter "TSC" frequency 1800013554 Hz quality 1000 Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Root mount waiting for: usbus4 Trying to mount root from ufs:/dev/ada0p2 [rw]... ugen1.2: <Logitech> at usbus1 rl0: link state changed to DOWN rl0: link state changed to UP ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/43.01, addr 2> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 info: [drm] Initialized drm 1.1.0 20060810 drmn0: <Intel i945G> on vgapci0 iicbus0: <Philips I2C bus> on iicbb0 addr 0xdb iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 iicbus2: <Philips I2C bus> on iicbb1 addr 0xdb iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 iicbus4: <Philips I2C bus> on iicbb2 addr 0xdb iic4: <I2C generic I/O> on iicbus4 iic5: <I2C generic I/O> on iicbus5 iicbus6: <Philips I2C bus> on iicbb3 addr 0xdb iic6: <I2C generic I/O> on iicbus6 iic7: <I2C generic I/O> on iicbus7 iicbus8: <Philips I2C bus> on iicbb4 addr 0xdb iic8: <I2C generic I/O> on iicbus8 iic9: <I2C generic I/O> on iicbus9 iicbus10: <Philips I2C bus> on iicbb5 addr 0xdb iic10: <I2C generic I/O> on iicbus10 iic11: <I2C generic I/O> on iicbus11 iicbus12: <Philips I2C bus> on iicbb6 addr 0xdb iic12: <I2C generic I/O> on iicbus12 iic13: <I2C generic I/O> on iicbus13 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. info: [drm] failed to find VBIOS tables drmn0: taking over the fictitious range 0xd0000000-0xe0000000 info: [drm] initialized overlay support info: [drm] Connector VGA-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.VGA-1 info: [drm] - kern.vt.fb.default_mode fbd0 on drmn0 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0

Xorg.0.log
Код: root@Free:/usr/ports/x11/xorg # cat /var/log/Xorg.0.log [ 7005.384] X.Org X Server 1.17.4 Release Date: 2015-10-28 [ 7005.385] X Protocol Version 11, Revision 0 [ 7005.385] Build Operating System: FreeBSD 10.3-RELEASE i386 [ 7005.385] Current Operating System: FreeBSD Free 10.3-RELEASE FreeBSD 10.3-RELEASE #0 r297264: Fri Mar 25 03:51:29 UTC 2016 root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386 [ 7005.385] Build Date: 25 June 2016 07:15:27AM [ 7005.385] [ 7005.385] Current version of pixman: 0.34.0 [ 7005.385] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7005.385] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7005.385] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 30 02:46:06 2016 [ 7005.385] (++) Using config file: "/root/xorg.conf.new" [ 7005.386] (==) ServerLayout "X.org Configured" [ 7005.386] (**) |-->Screen "Screen0" (0) [ 7005.386] (**) | |-->Monitor "Monitor0" [ 7005.386] (**) | |-->Device "Card0" [ 7005.386] (**) |-->Input Device "Mouse0" [ 7005.386] (**) |-->Input Device "Keyboard0" [ 7005.386] (==) Automatically adding devices [ 7005.386] (==) Automatically enabling devices [ 7005.386] (==) Not automatically adding GPU devices [ 7005.386] (**) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/, /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/ [ 7005.386] (**) ModulePath set to "/usr/local/lib/xorg/modules" [ 7005.386] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 7005.386] (WW) Disabling Mouse0 [ 7005.386] (WW) Disabling Keyboard0 [ 7005.386] (II) Loader magic: 0x8232070 [ 7005.386] (II) Module ABI versions: [ 7005.386] X.Org ANSI C Emulation: 0.4 [ 7005.386] X.Org Video Driver: 19.0 [ 7005.386] X.Org XInput driver : 21.0 [ 7005.386] X.Org Server Extension : 9.0 [ 7005.387] (--) PCI:*(0:0:2:0) 8086:2772:1019:2633 rev 2, Mem @ 0xfea80000/524288, 0xd0000000/268435456, 0xfea40000/262144, I/O @ 0x0000dc00/8, BIOS @ 0x????????/65536 [ 7005.387] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 7005.387] (II) LoadModule: "glx" [ 7005.387] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 7005.389] (II) Module glx: vendor="X.Org Foundation" [ 7005.390] compiled for 1.17.4, module version = 1.0.0 [ 7005.390] ABI class: X.Org Server Extension, version 9.0 [ 7005.390] (==) AIGLX enabled [ 7005.390] (II) LoadModule: "intel" [ 7005.390] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 7005.390] (II) Module intel: vendor="X.Org Foundation" [ 7005.390] compiled for 1.17.4, module version = 2.21.15 [ 7005.390] Module class: X.Org Video Driver [ 7005.390] ABI class: X.Org Video Driver, version 19.0 [ 7005.390] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 7005.391] (--) Using syscons driver with X support (version 2.0) [ 7005.391] (--) using VT number 9
[ 7005.405] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 7005.406] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 7005.406] (==) intel(0): RGB weight 888 [ 7005.406] (==) intel(0): Default visual is TrueColor [ 7005.406] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G [ 7005.406] (**) intel(0): Relaxed fencing disabled [ 7005.407] (**) intel(0): Wait on SwapBuffers? enabled [ 7005.407] (**) intel(0): Triple buffering? enabled [ 7005.407] (**) intel(0): Framebuffer tiled [ 7005.407] (**) intel(0): Pixmaps tiled [ 7005.407] (**) intel(0): 3D buffers tiled [ 7005.407] (**) intel(0): SwapBuffers wait enabled [ 7005.407] (==) intel(0): video overlay key set to 0x101fe [ 7005.451] (II) intel(0): Output VGA1 using monitor section Monitor0 [ 7005.486] (II) intel(0): EDID for output VGA1 [ 7005.486] (II) intel(0): Manufacturer: ACR Model: ad46 Serial#: 2171671030 [ 7005.486] (II) intel(0): Year: 2008 Week: 17 [ 7005.486] (II) intel(0): EDID Version: 1.3 [ 7005.486] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V [ 7005.487] (II) intel(0): Sync: Separate [ 7005.487] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 7005.487] (II) intel(0): Gamma: 2.20 [ 7005.487] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 7005.487] (II) intel(0): First detailed timing is preferred mode [ 7005.487] (II) intel(0): redX: 0.640 redY: 0.349 greenX: 0.284 greenY: 0.617 [ 7005.488] (II) intel(0): blueX: 0.142 blueY: 0.067 whiteX: 0.313 whiteY: 0.329 [ 7005.488] (II) intel(0): Supported established timings: [ 7005.488] (II) intel(0): 720x400@70Hz [ 7005.488] (II) intel(0): 640x480@60Hz [ 7005.488] (II) intel(0): 640x480@67Hz [ 7005.488] (II) intel(0): 640x480@72Hz [ 7005.488] (II) intel(0): 640x480@75Hz [ 7005.488] (II) intel(0): 800x600@56Hz [ 7005.488] (II) intel(0): 800x600@60Hz [ 7005.489] (II) intel(0): 800x600@72Hz [ 7005.489] (II) intel(0): 800x600@75Hz [ 7005.489] (II) intel(0): 832x624@75Hz [ 7005.489] (II) intel(0): 1024x768@60Hz [ 7005.489] (II) intel(0): 1024x768@70Hz [ 7005.489] (II) intel(0): 1024x768@75Hz [ 7005.489] (II) intel(0): 1280x1024@75Hz [ 7005.489] (II) intel(0): Manufacturer's mask: 0 [ 7005.489] (II) intel(0): Supported detailed timing: [ 7005.490] (II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 7005.490] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 7005.490] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 7005.490] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 145 MHz [ 7005.490] (II) intel(0): Serial No: L460C260404D [ 7005.490] (II) intel(0): Monitor name: AL1716 [ 7005.490] (II) intel(0): EDID (in hex): [ 7005.491] (II) intel(0): 00ffffffffffff00047246adf6117181 [ 7005.491] (II) intel(0): 1112010308221b78eadc55a359489e24 [ 7005.491] (II) intel(0): 115054bfef0001010101010101010101 [ 7005.491] (II) intel(0): 010101010101302a009851002a403070 [ 7005.491] (II) intel(0): 1300520e1100001e000000fd00384b1e [ 7005.491] (II) intel(0): 530e000a202020202020000000ff004c [ 7005.491] (II) intel(0): 34363043323630343034440a000000fc [ 7005.491] (II) intel(0): 00414c313731360a20202020202000ac [ 7005.491] (II) intel(0): Printing probed modes for output VGA1 [ 7005.492] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz UeP) [ 7005.492] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 7005.492] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 7005.492] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 7005.492] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 7005.492] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 7005.492] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 7005.493] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 7005.493] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 7005.493] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 7005.493] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 7005.493] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 7005.493] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 7005.494] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 7005.494] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 7005.494] (II) intel(0): Output VGA1 connected [ 7005.494] (II) intel(0): Using user preference for initial modes [ 7005.494] (II) intel(0): Output VGA1 using initial mode 1024x768 [ 7005.494] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 7005.494] (II) intel(0): Kernel page flipping support detected, enabling [ 7005.495] (==) intel(0): DPI set to (96, 96) [ 7005.495] (II) Loading sub module "fb" [ 7005.495] (II) LoadModule: "fb" [ 7005.495] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 7005.496] (II) Module fb: vendor="X.Org Foundation" [ 7005.496] compiled for 1.17.4, module version = 1.0.0 [ 7005.496] ABI class: X.Org ANSI C Emulation, version 0.4 [ 7005.496] (II) Loading sub module "dri2" [ 7005.496] (II) LoadModule: "dri2" [ 7005.496] (II) Module "dri2" already built-in [ 7005.497] (==) Depth 24 pixmap format is 32 bpp [ 7005.497] (II) intel(0): [DRI2] Setup complete [ 7005.497] (II) intel(0): [DRI2] DRI driver: i915 [ 7005.497] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 7005.497] (II) UXA(0): Driver registered support for the following operations: [ 7005.497] (II) solid [ 7005.498] (II) copy [ 7005.498] (II) composite (RENDER acceleration) [ 7005.498] (II) put_image [ 7005.498] (II) get_image [ 7005.498] (==) intel(0): Backing store enabled [ 7005.498] (==) intel(0): Silken mouse enabled [ 7005.498] (II) intel(0): Initializing HW Cursor [ 7005.498] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 7005.499] (==) intel(0): DPMS enabled [ 7005.499] (==) intel(0): Intel XvMC decoder disabled [ 7005.499] (II) intel(0): Set up textured video [ 7005.499] (II) intel(0): Set up overlay video [ 7005.499] (II) intel(0): direct rendering: DRI2 Enabled [ 7005.582] (--) RandR disabled [ 7005.589] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 7005.589] (II) AIGLX: enabled GLX_ARB_create_context [ 7005.589] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 7005.589] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 7005.589] (II) AIGLX: enabled GLX_INTEL_swap_event [ 7005.590] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 7005.590] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 7005.590] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 7005.590] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 7005.590] (II) AIGLX: Loaded and initialized i915 [ 7005.590] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 7005.591] (II) intel(0): Setting screen physical size to 270 x 203 [ 7005.877] (II) config/devd: probing input devices... [ 7005.877] (II) config/devd: adding input device (null) (/dev/kbdmux) [ 7005.878] (II) LoadModule: "kbd" [ 7005.878] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 7005.878] (II) Module kbd: vendor="X.Org Foundation" [ 7005.879] compiled for 1.17.4, module version = 1.8.1 [ 7005.879] Module class: X.Org XInput Driver [ 7005.879] ABI class: X.Org XInput driver, version 21.0 [ 7005.879] (II) Using input driver 'kbd' for 'kbdmux' [ 7005.879] (**) kbdmux: always reports core events [ 7005.879] (**) kbdmux: always reports core events [ 7005.880] (**) Option "Protocol" "standard" [ 7005.880] (**) Option "XkbRules" "base" [ 7005.880] (**) Option "XkbModel" "pc105" [ 7005.880] (**) Option "XkbLayout" "us" [ 7005.880] (**) Option "config_info" "devd:kbdmux" [ 7005.881] (II) XINPUT: Adding extended input device "kbdmux" (type: KEYBOARD, id 6) [ 7005.899] (II) config/devd: kbdmux is enabled, ignoring device atkbd0 [ 7005.899] (II) config/devd: adding input device (null) (/dev/sysmouse) [ 7005.899] (II) LoadModule: "mouse" [ 7005.900] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 7005.900] (II) Module mouse: vendor="X.Org Foundation" [ 7005.900] compiled for 1.17.4, module version = 1.9.1 [ 7005.900] Module class: X.Org XInput Driver [ 7005.901] ABI class: X.Org XInput driver, version 21.0 [ 7005.901] (II) Using input driver 'mouse' for 'sysmouse' [ 7005.901] (**) sysmouse: always reports core events [ 7005.901] (**) Option "Device" "/dev/sysmouse" [ 7005.901] (==) sysmouse: Protocol: "Auto" [ 7005.901] (**) sysmouse: always reports core events [ 7005.902] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50 [ 7005.902] (**) sysmouse: ZAxisMapping: buttons 4 and 5 [ 7005.902] (**) sysmouse: Buttons: 5 [ 7005.902] (**) Option "config_info" "devd:sysmouse" [ 7005.902] (II) XINPUT: Adding extended input device "sysmouse" (type: MOUSE, id 7) [ 7005.902] (**) sysmouse: (accel) keeping acceleration scheme 1 [ 7005.903] (**) sysmouse: (accel) acceleration profile 0 [ 7005.903] (**) sysmouse: (accel) acceleration factor: 2.000 [ 7005.903] (**) sysmouse: (accel) acceleration threshold: 4 [ 7005.903] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0 [ 7005.903] (II) sysmouse: SetupAuto: protocol is SysMouse [ 7005.903] (II) config/devd: device /dev/ums0 already opened [ 7021.722] (II) AIGLX: Suspending AIGLX clients for VT switch [ 7027.278] (II) config/devd: terminating backend... [ 7027.278] (II) UnloadModule: "mouse" [ 7027.278] (II) UnloadModule: "kbd" [ 7027.286] (II) Server terminated successfully (0). Closing log file.
|
|