BSDPORTAL.RU

#
# $FreeBSD: releng/11.1/etc/etc.amd64/ttys 289634 2015-10-20 16:10:46Z gjb $
#   @(#)ttys   5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs.  Common entries for the
# various columns include:
#
# name  The name of the terminal device.
#
# getty The program to start running on the terminal.  Typically a
#       getty program, as the name implies.  Other common entries
#       include none, when no getty is needed, and xdm, to start the
#       X Window System.
#
# type The initial terminal type for this port.  For hardwired
#      terminal lines, this will contain the type of terminal used.
#      For virtual consoles, the correct type is typically xterm.
#      Other common values include dialup for incoming modem ports, and
#      unknown when the terminal type cannot be predetermined.
#
# status Must be on or off.  If on, init will run the getty program on
#        the specified port.  If the word "secure" appears, this tty
#        allows root login.
#
# name   getty            type   status      comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console   none            unknown   off secure
#
ttyv0   "/usr/libexec/getty Pc"      xterm   on  secure
# Virtual terminals
ttyv1   "/usr/libexec/getty Pc"      xterm   on  secure
ttyv2   "/usr/libexec/getty Pc"      xterm   on  secure
ttyv3   "/usr/libexec/getty Pc"      xterm   on  secure
ttyv4   "/usr/libexec/getty Pc"      xterm   on  secure
ttyv5   "/usr/libexec/getty Pc"      xterm   on  secure
ttyv6   "/usr/libexec/getty Pc"      xterm   on  secure
ttyv7   "/usr/libexec/getty Pc"      xterm   on  secure
ttyv8   "/usr/local/bin/xdm -nodaemon"   xterm   off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0   "/usr/libexec/getty 3wire"   vt100   onifconsole secure
ttyu1   "/usr/libexec/getty 3wire"   vt100   onifconsole secure
ttyu2   "/usr/libexec/getty 3wire"   vt100   onifconsole secure
ttyu3   "/usr/libexec/getty 3wire"   vt100   onifconsole secure
# Dumb console
dcons   "/usr/libexec/getty std.9600"   vt100   off secure