BSDPORTAL.RU

На этом сайте обсуждаются вопросы использования ОС FreeBSD
 Портал  •  Статьи  •  Форум  •  Wiki  •  Поиск  •  FAQ  •  Обои  •   Официальная документация  •  Новые темы 

Часовой пояс: UTC + 4 часа




Начать новую тему Ответить на тему  [ Сообщений: 6 ] 
Автор Сообщение
 Заголовок сообщения: настроить сеть
СообщениеДобавлено: Пн 31 авг, 2020 2:26 pm 
Не в сети

Зарегистрирован: Пн 31 авг, 2020 2:21 pm
Сообщения: 3
Мои почтения Всем!....
пробую установить furybsd.
в live-режиме сеть работает
то есть браузер и всё такое
после установки нет
можете подсказать что сделать?


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: настроить сеть
СообщениеДобавлено: Пн 31 авг, 2020 6:47 pm 
Не в сети
Модератор

Зарегистрирован: Сб 11 сен, 2004 6:33 am
Сообщения: 5329
Откуда: Москва
thr писал(а):
можете подсказать что сделать?

Настроить сеть. https://www.freebsd.org/doc/handbook/co ... setup.html


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: настроить сеть
СообщениеДобавлено: Ср 02 сен, 2020 11:08 am 
Не в сети

Зарегистрирован: Пн 31 авг, 2020 2:21 pm
Сообщения: 3
оборудование соответствует
FreeBSD 12.1-RELEASE Hardware Notes
использую модем
во время установки не происходит настройка по DHCP
щас с линукс
второго устройсвта нету )))
можно ли настроить модем?
спасибо...
(FreeBSD-12.1-RELEASE-amd64-disc1.iso)


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: настроить сеть
СообщениеДобавлено: Ср 02 сен, 2020 12:39 pm 
Не в сети

Зарегистрирован: Пт 03 сен, 2004 1:26 pm
Сообщения: 2476
thr писал(а):
оборудование соответствует
FreeBSD 12.1-RELEASE Hardware Notes
использую модем
во время установки не происходит настройка по DHCP
щас с линукс
второго устройсвта нету )))
можно ли настроить модем?
спасибо...
(FreeBSD-12.1-RELEASE-amd64-disc1.iso)


можно, а в handbook не описано?
хотя бы что в dmesg, что за модем?


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: настроить сеть
СообщениеДобавлено: Ср 02 сен, 2020 4:20 pm 
Не в сети
Аватара пользователя

Зарегистрирован: Пн 04 янв, 2016 6:26 pm
Сообщения: 100
thr писал(а):
можно ли настроить модем?

Иногда нельзя.


Вернуться к началу
 Профиль  
 
 Заголовок сообщения: Re: настроить сеть
СообщениеДобавлено: Вт 22 сен, 2020 3:12 pm 
Не в сети

Зарегистрирован: Пн 31 авг, 2020 2:21 pm
Сообщения: 3
Код:
Bus 001 Device 002: ID 19d2:1405 ZTE WCDMA Technologies MSM

Код:
[    0.000000] Linux version 4.19.0-10-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.132-1 (2020-07-24)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64 root=UUID=7eaa8957-f1d9-45f7-9554-286e596fc77e ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000080de1fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000080de2000-0x0000000080de2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000080de3000-0x0000000080de3fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000080de4000-0x0000000088fe4fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000088fe5000-0x0000000089442fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000089443000-0x0000000089529fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008952a000-0x00000000895e1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000895e2000-0x0000000089e4efff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000089e4f000-0x0000000089efefff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000089eff000-0x0000000089efffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000089f00000-0x000000008f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046e7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x89547000  ACPI=0x89547000  SMBIOS=0x89c40000  SMBIOS 3.0=0x89c3f000  ESRT=0x85315f98  MEMATTR=0x852e8018
[    0.000000] secureboot: Secure boot could not be determined (mode 0)
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. B360M-D2V/B360M D2V, BIOS F1 02/13/2018
[    0.000000] tsc: Detected 3000.000 MHz processor
[    0.000932] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000933] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000939] last_pfn = 0x46e800 max_arch_pfn = 0x400000000
[    0.000941] MTRR default type: write-back
[    0.000942] MTRR fixed ranges enabled:
[    0.000943]   00000-9FFFF write-back
[    0.000943]   A0000-BFFFF uncachable
[    0.000944]   C0000-FFFFF write-protect
[    0.000944] MTRR variable ranges enabled:
[    0.000946]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000946]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000947]   2 base 0090000000 mask 7FF0000000 write-combining
[    0.000947]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.000948]   4 base 008B000000 mask 7FFF000000 uncachable
[    0.000948]   5 disabled
[    0.000949]   6 disabled
[    0.000949]   7 disabled
[    0.000949]   8 disabled
[    0.000950]   9 disabled
[    0.001789] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.001896] last_pfn = 0x89f00 max_arch_pfn = 0x400000000
[    0.008770] esrt: Reserving ESRT space from 0x0000000085315f98 to 0x0000000085315fd0.
[    0.008774] e820: update [mem 0x85315000-0x85315fff] usable ==> reserved
[    0.008785] Using GB pages for direct mapping
[    0.009152] RAMDISK: [mem 0x34ead000-0x3674dfff]
[    0.009160] ACPI: Early table checksum verification disabled
[    0.009162] ACPI: RSDP 0x0000000089547000 000024 (v02 ALASKA)
[    0.009164] ACPI: XSDT 0x00000000895470A8 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009168] ACPI: FACP 0x0000000089584B88 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.009172] ACPI: DSDT 0x0000000089547218 03D96A (v02 ALASKA A M I    01072009 INTL 20160527)
[    0.009174] ACPI: FACS 0x00000000895E1080 000040
[    0.009175] ACPI: APIC 0x0000000089584CA0 0000A0 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.009177] ACPI: FPDT 0x0000000089584D40 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009179] ACPI: FIDT 0x0000000089584D88 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009181] ACPI: MCFG 0x0000000089584E28 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.009182] ACPI: SSDT 0x0000000089584E68 000334 (v01 SataRe SataTabl 00001000 INTL 20160527)
[    0.009184] ACPI: SSDT 0x00000000895851A0 0017CB (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.009186] ACPI: SSDT 0x0000000089586970 00680E (v01 GBT    GSWApp   00000001 INTL 20160527)
[    0.009188] ACPI: SSDT 0x000000008958D180 0031C7 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.009190] ACPI: HPET 0x0000000089590348 000038 (v01 INTEL  A M I    00000002      01000013)
[    0.009191] ACPI: SSDT 0x0000000089590380 002332 (v02 INTEL  CflS_Rvp 00001000 INTL 20160527)
[    0.009193] ACPI: SSDT 0x00000000895926B8 000F9E (v02 INTEL  Ther_Rvp 00001000 INTL 20160527)
[    0.009195] ACPI: SSDT 0x0000000089593658 00299C (v02 INTEL  xh_cfsd4 00000000 INTL 20160527)
[    0.009197] ACPI: UEFI 0x0000000089595FF8 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.009199] ACPI: LPIT 0x0000000089596040 00005C (v01 INTEL  A M I    00000002      01000013)
[    0.009201] ACPI: SSDT 0x00000000895960A0 0027DE (v02 INTEL  PtidDevc 00001000 INTL 20160527)
[    0.009203] ACPI: SSDT 0x0000000089598880 000FFE (v02 INTEL  TbtTypeC 00000000 INTL 20160527)
[    0.009204] ACPI: DBGP 0x0000000089599880 000034 (v01 ALASKA A M I    00000002      01000013)
[    0.009206] ACPI: DBG2 0x00000000895998B8 000054 (v00 ALASKA A M I    00000002      01000013)
[    0.009208] ACPI: DMAR 0x0000000089599910 0000A8 (v01 INTEL  EDK2     00000002      01000013)
[    0.009209] ACPI: BGRT 0x00000000895999B8 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009211] ACPI: WSMT 0x00000000895999F0 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.009217] ACPI: Local APIC address 0xfee00000
[    0.009518] No NUMA configuration found
[    0.009518] Faking a node at [mem 0x0000000000000000-0x000000046e7fffff]
[    0.009521] NODE_DATA(0) allocated [mem 0x46e7fb000-0x46e7fffff]
[    0.009544] Zone ranges:
[    0.009545]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.009546]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.009547]   Normal   [mem 0x0000000100000000-0x000000046e7fffff]
[    0.009547]   Device   empty
[    0.009548] Movable zone start for each node
[    0.009548] Early memory node ranges
[    0.009549]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.009549]   node   0: [mem 0x0000000000100000-0x0000000080de1fff]
[    0.009550]   node   0: [mem 0x0000000080de4000-0x0000000088fe4fff]
[    0.009550]   node   0: [mem 0x0000000089443000-0x0000000089529fff]
[    0.009551]   node   0: [mem 0x0000000089eff000-0x0000000089efffff]
[    0.009551]   node   0: [mem 0x0000000100000000-0x000000046e7fffff]
[    0.009963] Zeroed struct page in unavailable ranges: 34711 pages
[    0.009964] Initmem setup node 0 [mem 0x0000000000001000-0x000000046e7fffff]
[    0.009965] On node 0 totalpages: 4159593
[    0.009965]   DMA zone: 64 pages used for memmap
[    0.009966]   DMA zone: 23 pages reserved
[    0.009967]   DMA zone: 3998 pages, LIFO batch:0
[    0.010038]   DMA32 zone: 8708 pages used for memmap
[    0.010039]   DMA32 zone: 557259 pages, LIFO batch:63
[    0.021377]   Normal zone: 56224 pages used for memmap
[    0.021378]   Normal zone: 3598336 pages, LIFO batch:63
[    0.082064] Reserving Intel graphics memory at [mem 0x8b800000-0x8f7fffff]
[    0.082469] ACPI: PM-Timer IO Port: 0x1808
[    0.082470] ACPI: Local APIC address 0xfee00000
[    0.082475] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.082475] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.082476] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.082476] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.082476] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.082477] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.082524] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.082525] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.082526] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.082527] ACPI: IRQ0 used by override.
[    0.082528] ACPI: IRQ9 used by override.
[    0.082529] Using ACPI (MADT) for SMP configuration information
[    0.082530] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.082535] e820: update [mem 0x85c47000-0x85c8bfff] usable ==> reserved
[    0.082542] TSC deadline timer available
[    0.082543] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[    0.082556] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.082557] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.082558] PM: Registered nosave memory: [mem 0x80de2000-0x80de2fff]
[    0.082559] PM: Registered nosave memory: [mem 0x80de3000-0x80de3fff]
[    0.082559] PM: Registered nosave memory: [mem 0x85315000-0x85315fff]
[    0.082560] PM: Registered nosave memory: [mem 0x85c47000-0x85c8bfff]
[    0.082561] PM: Registered nosave memory: [mem 0x88fe5000-0x89442fff]
[    0.082562] PM: Registered nosave memory: [mem 0x8952a000-0x895e1fff]
[    0.082563] PM: Registered nosave memory: [mem 0x895e2000-0x89e4efff]
[    0.082563] PM: Registered nosave memory: [mem 0x89e4f000-0x89efefff]
[    0.082564] PM: Registered nosave memory: [mem 0x89f00000-0x8f7fffff]
[    0.082565] PM: Registered nosave memory: [mem 0x8f800000-0xdfffffff]
[    0.082565] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.082566] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.082566] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.082566] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.082567] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.082567] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.082567] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.082568] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.082568] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.082570] [mem 0x8f800000-0xdfffffff] available for PCI devices
[    0.082570] Booting paravirtualized kernel on bare hardware
[    0.082572] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.160529] random: get_random_bytes called from start_kernel+0x93/0x52f with crng_init=0
[    0.160534] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[    0.160659] percpu: Embedded 45 pages/cpu s144408 r8192 d31720 u262144
[    0.160664] pcpu-alloc: s144408 r8192 d31720 u262144 alloc=1*2097152
[    0.160665] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[    0.160680] Built 1 zonelists, mobility grouping on.  Total pages: 4094574
[    0.160680] Policy zone: Normal
[    0.160682] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-10-amd64 root=UUID=7eaa8957-f1d9-45f7-9554-286e596fc77e ro quiet
[    0.163611] Calgary: detecting Calgary via BIOS EBDA area
[    0.163612] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.192206] Memory: 16170328K/16638372K available (10252K kernel code, 1241K rwdata, 3316K rodata, 1592K init, 2272K bss, 468044K reserved, 0K cma-reserved)
[    0.192269] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.192273] Kernel/User page tables isolation: enabled
[    0.197986] ftrace: allocating 31900 entries in 125 pages
[    0.208091] rcu: Hierarchical RCU implementation.
[    0.208092] rcu:    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
[    0.208093] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.210423] NR_IRQS: 33024, nr_irqs: 1536, preallocated irqs: 16
[    0.210853] Console: colour dummy device 80x25
[    0.210857] console [tty0] enabled
[    0.210868] ACPI: Core revision 20180810
[    0.211257] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.211295] hpet clockevent registered
[    0.211359] APIC: Switch to symmetric I/O mode setup
[    0.211360] DMAR: Host address width 39
[    0.211361] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.211365] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.211365] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.211368] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.211369] DMAR: RMRR base: 0x000000893ec000 end: 0x0000008940bfff
[    0.211369] DMAR: RMRR base: 0x0000008b000000 end: 0x0000008f7fffff
[    0.211371] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.211371] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.211372] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.213496] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.213497] x2apic enabled
[    0.213521] Switched APIC routing to cluster x2apic.
[    0.219640] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.239311] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
[    0.239321] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.00 BogoMIPS (lpj=12000000)
[    0.239323] pid_max: default: 32768 minimum: 301
[    0.240057] Security Framework initialized
[    0.240058] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.240072] AppArmor: AppArmor initialized
[    0.241580] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.242340] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.242368] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.242392] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.242545] CPU0: Thermal monitoring enabled (TM1)
[    0.242565] process: using mwait in idle threads
[    0.242567] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.242567] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.242568] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.242569] Spectre V2 : Mitigation: Full generic retpoline
[    0.242570] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.242570] Speculative Store Bypass: Vulnerable
[    0.242590] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.242591] SRBDS: Vulnerable: No microcode
[    0.242591] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.245420] Freeing SMP alternatives memory: 24K
[    0.248736] smpboot: CPU0: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.248799] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.248823] ... version:                4
[    0.248823] ... bit width:              48
[    0.248823] ... generic registers:      8
[    0.248824] ... value mask:             0000ffffffffffff
[    0.248824] ... max period:             00007fffffffffff
[    0.248825] ... fixed-purpose events:   3
[    0.248825] ... event mask:             00000007000000ff
[    0.248856] rcu: Hierarchical SRCU implementation.
[    0.249143] random: crng done (trusting CPU's manufacturer)
[    0.249461] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.249498] smp: Bringing up secondary CPUs ...
[    0.249544] x86: Booting SMP configuration:
[    0.249545] .... node  #0, CPUs:      #1 #2 #3 #4 #5
[    0.249980] smp: Brought up 1 node, 6 CPUs
[    0.249980] smpboot: Max logical packages: 1
[    0.249980] smpboot: Total of 6 processors activated (36000.00 BogoMIPS)
[    0.251621] devtmpfs: initialized
[    0.251621] x86/mm: Memory block size: 128MB
[    0.252493] PM: Registering ACPI NVS region [mem 0x80de2000-0x80de2fff] (4096 bytes)
[    0.252493] PM: Registering ACPI NVS region [mem 0x8952a000-0x895e1fff] (753664 bytes)
[    0.252493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.252493] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.252493] pinctrl core: initialized pinctrl subsystem
[    0.252493] NET: Registered protocol family 16
[    0.252493] audit: initializing netlink subsys (disabled)
[    0.252493] audit: type=2000 audit(1600771850.036:1): state=initialized audit_enabled=0 res=1
[    0.252493] cpuidle: using governor ladder
[    0.252493] cpuidle: using governor menu
[    0.252493] KVM setup pv remote TLB flush
[    0.252493] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.252493] ACPI: bus type PCI registered
[    0.252493] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.252493] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.252493] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.252493] PCI: Using configuration type 1 for base access
[    0.252493] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.252493] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.252493] ACPI: Added _OSI(Module Device)
[    0.252493] ACPI: Added _OSI(Processor Device)
[    0.252493] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.252493] ACPI: Added _OSI(Processor Aggregator Device)
[    0.252493] ACPI: Added _OSI(Linux-Dell-Video)
[    0.252493] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.303181] ACPI: 10 ACPI AML tables successfully acquired and loaded
[    3.365213] ACPI: Dynamic OEM Table Load:
[    3.365218] ACPI: SSDT 0xFFFF94C41B832800 0006C6 (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    3.365619] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    3.366862] ACPI: Dynamic OEM Table Load:
[    3.366866] ACPI: SSDT 0xFFFF94C41BADCC00 000386 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    3.367216] ACPI: Dynamic OEM Table Load:
[    3.367219] ACPI: SSDT 0xFFFF94C41BADAE00 00010A (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    3.367513] ACPI: Dynamic OEM Table Load:
[    3.367517] ACPI: SSDT 0xFFFF94C41B831000 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    3.368067] ACPI: Dynamic OEM Table Load:
[    3.368072] ACPI: SSDT 0xFFFF94C41BBAE000 000EF1 (v02 PmRef  ApIst    00003000 INTL 20160527)
[    3.368874] ACPI: Dynamic OEM Table Load:
[    3.368877] ACPI: SSDT 0xFFFF94C41BADF800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    3.369242] ACPI: Dynamic OEM Table Load:
[    3.369245] ACPI: SSDT 0xFFFF94C41BADEC00 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    3.372277] ACPI: Interpreter enabled
[    3.372312] ACPI: (supports S0 S3 S4 S5)
[    3.372313] ACPI: Using IOAPIC for interrupt routing
[    3.372344] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    3.373327] ACPI: Enabled 5 GPEs in block 00 to 7F
[    3.377246] ACPI: Power Resource [PXP] (off)
[    3.383698] ACPI: Power Resource [USBC] (on)
[    3.383821] ACPI: Power Resource [PAUD] (on)
[    3.386329] ACPI: Power Resource [V0PR] (on)
[    3.386465] ACPI: Power Resource [V1PR] (on)
[    3.386596] ACPI: Power Resource [V2PR] (on)
[    3.390423] ACPI: Power Resource [PXTC] (on)
[    3.396623] ACPI: Power Resource [WRST] (on)
[    3.400187] ACPI: Power Resource [FN00] (off)
[    3.400247] ACPI: Power Resource [FN01] (off)
[    3.400307] ACPI: Power Resource [FN02] (off)
[    3.400365] ACPI: Power Resource [FN03] (off)
[    3.400422] ACPI: Power Resource [FN04] (off)
[    3.400935] ACPI: Power Resource [PIN] (off)
[    3.401329] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    3.401332] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    3.401460] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[    3.401578] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[    3.401579] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    3.402264] PCI host bridge to bus 0000:00
[    3.402266] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    3.402267] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    3.402268] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    3.402268] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    3.402269] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    3.402270] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    3.402270] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    3.402271] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    3.402272] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    3.402272] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    3.402273] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    3.402274] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    3.402274] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    3.402275] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    3.402276] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    3.402276] pci_bus 0000:00: root bus resource [mem 0x8f800000-0xdfffffff window]
[    3.402277] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    3.402278] pci_bus 0000:00: root bus resource [bus 00-fe]
[    3.402284] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[    3.402583] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[    3.402592] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[    3.402597] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
[    3.402600] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    3.402612] pci 0000:00:02.0: BAR 2: assigned to efifb
[    3.402875] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[    3.402911] pci 0000:00:12.0: reg 0x10: [mem 0xa121c000-0xa121cfff 64bit]
[    3.403180] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[    3.403209] pci 0000:00:14.0: reg 0x10: [mem 0xa1200000-0xa120ffff 64bit]
[    3.403303] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    3.403457] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[    3.403485] pci 0000:00:14.2: reg 0x10: [mem 0xa1216000-0xa1217fff 64bit]
[    3.403500] pci 0000:00:14.2: reg 0x18: [mem 0xa121b000-0xa121bfff 64bit]
[    3.403691] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[    3.403727] pci 0000:00:16.0: reg 0x10: [mem 0xa121a000-0xa121afff 64bit]
[    3.403830] pci 0000:00:16.0: PME# supported from D3hot
[    3.404055] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
[    3.404081] pci 0000:00:17.0: reg 0x10: [mem 0xa1214000-0xa1215fff]
[    3.404092] pci 0000:00:17.0: reg 0x14: [mem 0xa1219000-0xa12190ff]
[    3.404102] pci 0000:00:17.0: reg 0x18: [io  0x4070-0x4077]
[    3.404113] pci 0000:00:17.0: reg 0x1c: [io  0x4060-0x4063]
[    3.404123] pci 0000:00:17.0: reg 0x20: [io  0x4040-0x405f]
[    3.404134] pci 0000:00:17.0: reg 0x24: [mem 0xa1218000-0xa12187ff]
[    3.404192] pci 0000:00:17.0: PME# supported from D3hot
[    3.404393] pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400
[    3.404514] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    3.404536] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[    3.404757] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[    3.404877] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    3.405109] pci 0000:00:1f.0: [8086:a308] type 00 class 0x060100
[    3.405482] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[    3.405555] pci 0000:00:1f.3: reg 0x10: [mem 0xa1210000-0xa1213fff 64bit]
[    3.405619] pci 0000:00:1f.3: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
[    3.405751] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    3.405987] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[    3.406045] pci 0000:00:1f.4: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[    3.406108] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    3.406293] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[    3.406315] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    3.406568] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    3.406606] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
[    3.406642] pci 0000:01:00.0: reg 0x18: [mem 0xa1104000-0xa1104fff 64bit]
[    3.406664] pci 0000:01:00.0: reg 0x20: [mem 0xa1100000-0xa1103fff 64bit]
[    3.406789] pci 0000:01:00.0: supports D1 D2
[    3.406790] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.406911] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    3.406914] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    3.406917] pci 0000:00:1c.0:   bridge window [mem 0xa1100000-0xa11fffff]
[    3.407006] acpiphp: Slot [1] registered
[    3.407015] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    3.408420] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[    3.408445] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[    3.408470] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[    3.408494] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[    3.408518] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[    3.408542] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[    3.408567] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[    3.408591] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[    3.411318] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    3.411318] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    3.411320] pci 0000:00:02.0: vgaarb: bridge control possible
[    3.411321] vgaarb: loaded
[    3.411355] pps_core: LinuxPPS API ver. 1 registered
[    3.411355] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.411357] PTP clock support registered
[    3.411361] EDAC MC: Ver: 3.0.0
[    3.411439] Registered efivars operations
[    3.411439] PCI: Using ACPI for IRQ routing
[    3.499430] PCI: pci_cache_line_size set to 64 bytes
[    3.499505] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    3.499506] e820: reserve RAM buffer [mem 0x80de2000-0x83ffffff]
[    3.499506] e820: reserve RAM buffer [mem 0x85315000-0x87ffffff]
[    3.499507] e820: reserve RAM buffer [mem 0x85c47000-0x87ffffff]
[    3.499507] e820: reserve RAM buffer [mem 0x88fe5000-0x8bffffff]
[    3.499508] e820: reserve RAM buffer [mem 0x8952a000-0x8bffffff]
[    3.499509] e820: reserve RAM buffer [mem 0x89f00000-0x8bffffff]
[    3.499510] e820: reserve RAM buffer [mem 0x46e800000-0x46fffffff]
[    3.499571] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    3.499571] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    3.503325] clocksource: Switched to clocksource tsc-early
[    3.509917] VFS: Disk quotas dquot_6.6.0
[    3.509927] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.509995] AppArmor: AppArmor Filesystem Enabled
[    3.510003] pnp: PnP ACPI init
[    3.510189] system 00:00: [io  0x0a00-0x0a2f] has been reserved
[    3.510190] system 00:00: [io  0x0a30-0x0a3f] has been reserved
[    3.510191] system 00:00: [io  0x0a40-0x0a4f] has been reserved
[    3.510194] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.510775] pnp 00:01: [dma 0 disabled]
[    3.510803] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.510889] system 00:02: [io  0x0680-0x069f] has been reserved
[    3.510890] system 00:02: [io  0x164e-0x164f] has been reserved
[    3.510892] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.510905] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    3.510973] system 00:04: [io  0x1854-0x1857] has been reserved
[    3.510975] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    3.511100] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    3.511101] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    3.511102] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    3.511103] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    3.511104] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    3.511105] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    3.511105] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    3.511106] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    3.511108] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.511283] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    3.511284] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    3.511285] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[    3.511286] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    3.511287] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    3.511288] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    3.511289] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    3.511291] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.511530] system 00:07: [io  0x2000-0x20fe] has been reserved
[    3.511532] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.512330] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    3.512879] pnp: PnP ACPI: found 9 devices
[    3.518221] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    3.518248] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    3.518249] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    3.518250] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    3.518256] pci 0000:00:1d.0: BAR 14: assigned [mem 0x8f800000-0x8f9fffff]
[    3.518264] pci 0000:00:1d.0: BAR 15: assigned [mem 0x8fa00000-0x8fbfffff 64bit pref]
[    3.518265] pci 0000:00:1d.0: BAR 13: assigned [io  0x5000-0x5fff]
[    3.518270] pci 0000:00:1f.4: BAR 0: assigned [mem 0x8fc00000-0x8fc000ff 64bit]
[    3.518303] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    3.518306] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    3.518310] pci 0000:00:1c.0:   bridge window [mem 0xa1100000-0xa11fffff]
[    3.518318] pci 0000:00:1d.0: PCI bridge to [bus 02]
[    3.518322] pci 0000:00:1d.0:   bridge window [io  0x5000-0x5fff]
[    3.518326] pci 0000:00:1d.0:   bridge window [mem 0x8f800000-0x8f9fffff]
[    3.518330] pci 0000:00:1d.0:   bridge window [mem 0x8fa00000-0x8fbfffff 64bit pref]
[    3.518337] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    3.518338] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    3.518338] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    3.518339] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    3.518340] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    3.518340] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    3.518341] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    3.518342] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    3.518342] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    3.518343] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    3.518344] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    3.518345] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    3.518345] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    3.518346] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    3.518347] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    3.518347] pci_bus 0000:00: resource 19 [mem 0x8f800000-0xdfffffff window]
[    3.518348] pci_bus 0000:00: resource 20 [mem 0xfc800000-0xfe7fffff window]
[    3.518349] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    3.518350] pci_bus 0000:01: resource 1 [mem 0xa1100000-0xa11fffff]
[    3.518350] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    3.518351] pci_bus 0000:02: resource 1 [mem 0x8f800000-0x8f9fffff]
[    3.518352] pci_bus 0000:02: resource 2 [mem 0x8fa00000-0x8fbfffff 64bit pref]
[    3.518463] NET: Registered protocol family 2
[    3.518555] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    3.518591] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    3.518710] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    3.518788] TCP: Hash tables configured (established 131072 bind 65536)
[    3.518811] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    3.518841] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    3.518889] NET: Registered protocol family 1
[    3.518892] NET: Registered protocol family 44
[    3.518898] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    3.518966] PCI: CLS 64 bytes, default 64
[    3.518987] Unpacking initramfs...
[    3.842957] Freeing initrd memory: 25220K
[    3.859422] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.859423] software IO TLB: mapped [mem 0x812e8000-0x852e8000] (64MB)
[    3.859441] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e459bf4c, max_idle_ns: 440795289890 ns
[    3.859453] clocksource: Switched to clocksource tsc
[    3.859952] Initialise system trusted keyrings
[    3.859959] Key type blacklist registered
[    3.859988] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    3.860768] zbud: loaded
[    3.970008] Key type asymmetric registered
[    3.970008] Asymmetric key parser 'x509' registered
[    3.970013] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    3.970036] io scheduler noop registered
[    3.970037] io scheduler deadline registered
[    3.970054] io scheduler cfq registered (default)
[    3.970055] io scheduler mq-deadline registered
[    3.970563] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    3.970606] dpc 0000:00:1c.0:pcie008: DPC error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    3.970730] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.970740] efifb: probing for efifb
[    3.970746] efifb: framebuffer at 0x90000000, using 3072k, total 3072k
[    3.970746] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    3.970747] efifb: scrolling: redraw
[    3.970748] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.971933] Console: switching to colour frame buffer device 128x48
[    3.973057] fb0: EFI VGA frame buffer device
[    3.973062] intel_idle: MWAIT substates: 0x11142120
[    3.973063] intel_idle: v0.4.1 model 0x9E
[    3.973267] intel_idle: lapic_timer_reliable_states 0xffffffff
[    3.973947] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.995914] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.996395] Linux agpgart interface v0.103
[    3.996427] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    3.996428] AMD IOMMUv2 functionality not available on this system
[    3.996783] i8042: PNP: No PS/2 controller found.
[    3.996872] mousedev: PS/2 mouse device common for all mice
[    3.996899] rtc_cmos 00:03: RTC can wake from S4
[    3.997916] rtc_cmos 00:03: registered as rtc0
[    3.997925] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    3.997930] intel_pstate: Intel P-state driver initializing
[    3.998277] intel_pstate: HWP enabled
[    3.998322] ledtrig-cpu: registered to indicate activity on CPUs
[    3.998577] NET: Registered protocol family 10
[    4.002705] Segment Routing with IPv6
[    4.002717] mip6: Mobile IPv6
[    4.002718] NET: Registered protocol family 17
[    4.002780] mpls_gso: MPLS GSO support
[    4.003125] mce: Using 12 MCE banks
[    4.003143] microcode: sig=0x906ea, pf=0x2, revision=0x74
[    4.003273] microcode: Microcode Update Driver: v2.2.
[    4.003280] sched_clock: Marking stable (3998794062, 4476571)->(4010909052, -7638419)
[    4.003372] registered taskstats version 1
[    4.003372] Loading compiled-in X.509 certificates
[    4.022828] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[    4.022837] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9'
[    4.023558] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring
[    4.023570] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring
[    4.024205] zswap: loaded using pool lzo/zbud
[    4.024449] AppArmor: AppArmor sha1 policy hashing enabled
[    4.025171] rtc_cmos 00:03: setting system clock to 2020-09-22 10:50:54 UTC (1600771854)
[    4.157852] Freeing unused kernel image memory: 1592K
[    4.179425] Write protecting the kernel read-only data: 16384k
[    4.180335] Freeing unused kernel image memory: 2028K
[    4.180538] Freeing unused kernel image memory: 780K
[    4.184903] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.184903] x86/mm: Checking user space page tables
[    4.189028] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.189029] Run /init as init process
[    4.239896] ACPI: Invalid passive threshold
[    4.240027] thermal LNXTHERM:00: registered as thermal_zone0
[    4.240028] ACPI: Thermal Zone [TZ10] (17 C)
[    4.240262] thermal LNXTHERM:01: registered as thermal_zone1
[    4.240263] ACPI: Thermal Zone [TZ00] (28 C)
[    4.241532] i801_smbus 0000:00:1f.4: enabling device (0001 -> 0003)
[    4.241648] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    4.241725] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    4.243970] cryptd: max_cpu_qlen set to 1000
[    4.246213] SCSI subsystem initialized
[    4.246241] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    4.248440] ACPI: bus type USB registered
[    4.248450] usbcore: registered new interface driver usbfs
[    4.248454] usbcore: registered new interface driver hub
[    4.248469] usbcore: registered new device driver usb
[    4.249730] AVX2 version of gcm_enc/dec engaged.
[    4.249730] AES CTR mode by8 optimization enabled
[    4.253313] libata version 3.00 loaded.
[    4.255155] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.255159] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    4.255658] ahci 0000:00:17.0: version 3.0
[    4.256293] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
[    4.256298] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    4.256430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    4.256431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.256431] usb usb1: Product: xHCI Host Controller
[    4.256432] usb usb1: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd
[    4.256432] usb usb1: SerialNumber: 0000:00:14.0
[    4.256490] hub 1-0:1.0: USB hub found
[    4.256506] hub 1-0:1.0: 16 ports detected
[    4.257428] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    4.257430] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    4.257431] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    4.257441] libphy: r8169: probed
[    4.257465] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    4.257465] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.257466] usb usb2: Product: xHCI Host Controller
[    4.257466] usb usb2: Manufacturer: Linux 4.19.0-10-amd64 xhci-hcd
[    4.257467] usb usb2: SerialNumber: 0000:00:14.0
[    4.257525] hub 2-0:1.0: USB hub found
[    4.257549] hub 2-0:1.0: 6 ports detected
[    4.257734] r8169 0000:01:00.0 eth0: RTL8168h/8111h, e0:d5:5e:85:0a:66, XID 54100800, IRQ 123
[    4.257735] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    4.258287] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    4.265915] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    4.265917] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part ems deso sadm sds apst
[    4.333017] scsi host0: ahci
[    4.333532] scsi host1: ahci
[    4.333963] scsi host2: ahci
[    4.334373] scsi host3: ahci
[    4.334775] scsi host4: ahci
[    4.335105] scsi host5: ahci
[    4.335276] ata1: SATA max UDMA/133 abar m2048@0xa1218000 port 0xa1218100 irq 124
[    4.335280] ata2: SATA max UDMA/133 abar m2048@0xa1218000 port 0xa1218180 irq 124
[    4.335283] ata3: SATA max UDMA/133 abar m2048@0xa1218000 port 0xa1218200 irq 124
[    4.335287] ata4: SATA max UDMA/133 abar m2048@0xa1218000 port 0xa1218280 irq 124
[    4.335290] ata5: SATA max UDMA/133 abar m2048@0xa1218000 port 0xa1218300 irq 124
[    4.335293] ata6: SATA max UDMA/133 abar m2048@0xa1218000 port 0xa1218380 irq 124
[    4.595396] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    4.650450] ata6: SATA link down (SStatus 4 SControl 300)
[    4.650490] ata4: SATA link down (SStatus 4 SControl 300)
[    4.650547] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    4.650581] ata2: SATA link down (SStatus 4 SControl 300)
[    4.650617] ata3: SATA link down (SStatus 4 SControl 300)
[    4.650654] ata5: SATA link down (SStatus 4 SControl 300)
[    4.653531] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.653537] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.653541] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.653859] ata1.00: supports DRM functions and may not be fully accessible
[    4.654742] ata1.00: disabling queued TRIM support
[    4.654746] ata1.00: ATA-9: Samsung SSD 850 120GB, MVT01B6Q, max UDMA/133
[    4.654749] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    4.658101] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    4.658106] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    4.658111] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    4.658423] ata1.00: supports DRM functions and may not be fully accessible
[    4.659177] ata1.00: disabling queued TRIM support
[    4.660817] ata1.00: configured for UDMA/133
[    4.661083] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
[    4.673350] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    4.673353] sd 0:0:0:0: [sda] Write Protect is off
[    4.673354] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.673379] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.674662]  sda: sda1 sda2 sda3 sda4
[    4.675068] sd 0:0:0:0: [sda] supports TCG Opal
[    4.675069] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.726840] PM: Image not found (code -22)
[    4.755461] usb 1-3: New USB device found, idVendor=19d2, idProduct=1405, bcdDevice=56.45
[    4.755465] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.755468] usb 1-3: Product: ZTE Mobile Broadband
[    4.755471] usb 1-3: Manufacturer: ZTE,Incorporated
[    4.755473] usb 1-3: SerialNumber: 1234567890ABCDEF
[    4.767687] usb-storage 1-3:1.2: USB Mass Storage device detected
[    4.767865] scsi host6: usb-storage 1-3:1.2
[    4.767907] usbcore: registered new interface driver usb-storage
[    4.768862] usbcore: registered new interface driver uas
[    4.863747] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.891420] usb 1-5: new low-speed USB device number 3 using xhci_hcd
[    4.974888] systemd[1]: Inserted module 'autofs4'
[    5.037667] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.044768] usb 1-5: New USB device found, idVendor=0461, idProduct=0010, bcdDevice= 1.04
[    5.044769] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.044770] usb 1-5: Product: USB Keyboard
[    5.044770] usb 1-5: Manufacturer: NOVATEK
[    5.055466] systemd[1]: Detected architecture x86-64.
[    5.057903] systemd[1]: Set hostname to <deb>.
[    5.112466] systemd[1]: Listening on udev Kernel Socket.
[    5.113852] systemd[1]: Created slice User and Session Slice.
[    5.113859] systemd[1]: Reached target Slices.
[    5.114027] systemd[1]: Created slice system-getty.slice.
[    5.114074] systemd[1]: Listening on udev Control Socket.
[    5.114103] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    5.114143] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.123044] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    5.171322] usb 1-6: new low-speed USB device number 4 using xhci_hcd
[    5.179716] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    5.179721] ACPI: Sleep Button [SLPB]
[    5.180651] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    5.180656] ACPI: Power Button [PWRB]
[    5.180686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    5.180692] ACPI: Power Button [PWRF]
[    5.189479] systemd-journald[275]: Received request to flush runtime journal from PID 1
[    5.202562] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    5.202666] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    5.223682] iTCO_vendor_support: vendor-support=0
[    5.223716] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    5.224019] EFI Variables Facility v0.08 2004-May-17
[    5.225609] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.225800] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[    5.225822] iTCO_wdt: probe of iTCO_wdt failed with error -16
[    5.227048] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.229455] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    5.235808] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    5.235809] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.235809] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.235809] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.235809] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.235810] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    5.265819] pstore: Using compression: deflate
[    5.265825] pstore: Registered efi as persistent store backend
[    5.323756] usb 1-6: New USB device found, idVendor=09da, idProduct=000a, bcdDevice= 0.14
[    5.323757] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.323758] usb 1-6: Product: USB Mouse
[    5.323758] usb 1-6: Manufacturer: A4Tech
[    5.336059] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    5.337769] hidraw: raw HID events driver (C) Jiri Kosina
[    5.338144] Adding 16637948k swap on /dev/sda3.  Priority:-2 extents:1 across:16637948k SSFS
[    5.357820] checking generic (90000000 300000) vs hw (90000000 10000000)
[    5.357821] fb: switching to inteldrmfb from EFI VGA
[    5.357841] Console: switching to colour dummy device 80x25
[    5.361814] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.362378] cdc_ether 1-3:1.0 usb0: register 'cdc_ether' at usb-0000:00:14.0-3, ZTE CDC Ethernet Device, de:98:2f:8c:a1:7a
[    5.362394] usbcore: registered new interface driver cdc_ether
[    5.363327] usbcore: registered new interface driver usbhid
[    5.363328] usbhid: USB HID core driver
[    5.364125] cdc_ether 1-3:1.0 enp0s20f0u3: renamed from usb0
[    5.370363] [drm] Replacing VGA console driver
[    5.371386] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.371386] [drm] Driver supports precise vblank timestamp query.
[    5.371767] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.371980] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    5.373082] i915 0000:00:02.0: firmware: failed to load i915/kbl_dmc_ver1_04.bin (-2)
[    5.373085] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[    5.373086] i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_04.bin failed with error -2
[    5.373088] i915 0000:00:02.0: Failed to load DMC firmware i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
[    5.373088] i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[    5.389786] audit: type=1400 audit(1600771855.860:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=460 comm="apparmor_parser"
[    5.389787] audit: type=1400 audit(1600771855.860:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=460 comm="apparmor_parser"
[    5.390067] audit: type=1400 audit(1600771855.860:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=459 comm="apparmor_parser"
[    5.390068] audit: type=1400 audit(1600771855.860:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=459 comm="apparmor_parser"
[    5.390069] audit: type=1400 audit(1600771855.860:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=459 comm="apparmor_parser"
[    5.399723] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:0461:0010.0001/input/input4
[    5.459412] hid-generic 0003:0461:0010.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-5/input0
[    5.459488] input: NOVATEK USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:0461:0010.0002/input/input5
[    5.510052] intel_rapl: Found RAPL domain package
[    5.510053] intel_rapl: Found RAPL domain core
[    5.510053] intel_rapl: Found RAPL domain uncore
[    5.523356] input: NOVATEK USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:0461:0010.0002/input/input6
[    5.523382] hid-generic 0003:0461:0010.0002: input,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-5/input1
[    5.523975] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:09DA:000A.0003/input/input7
[    5.527889] a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:14.0-6/input0
[    5.643648] [drm] failed to retrieve link info, disabling eDP
[    5.781398] scsi 6:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  2.31 PQ: 0 ANSI: 2
[    5.783362] scsi 6:0:0:1: Direct-Access     ZTE      MMC Storage      2.31 PQ: 0 ANSI: 2
[    5.783467] scsi 6:0:0:0: Attached scsi generic sg1 type 5
[    5.783544] sd 6:0:0:1: Attached scsi generic sg2 type 0
[    5.786330] sd 6:0:0:1: Power-on or device reset occurred
[    5.792392] sd 6:0:0:1: [sdb] Attached SCSI removable disk
[    5.803357] sr 6:0:0:0: [sr0] scsi-1 drive
[    5.803358] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.803473] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    5.913402] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0
[    5.914566] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.914796] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[    5.914964] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.938346] fbcon: inteldrmfb (fb0) is primary device
[    5.970988] Console: switching to colour frame buffer device 160x64
[    5.974135] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    5.974136] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.974137] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.974137] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    5.974138] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    5.974139] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    5.974139] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    5.974140] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    5.989078] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    6.020258] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    6.020286] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    6.020309] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    6.020334] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    6.020355] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    6.022893] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    6.023086] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    6.024028] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[    6.024181] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
[    6.024897] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[   99.835750] broken atomic modeset userspace detected, disabling atomic


Вернуться к началу
 Профиль  
 
Показать сообщения за:  Поле сортировки  
Начать новую тему Ответить на тему  [ Сообщений: 6 ] 

Часовой пояс: UTC + 4 часа


Кто сейчас на конференции

Зарегистрированные пользователи: Bing [Bot]


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Создано на основе phpBB® Forum Software © phpBB Group
Русская поддержка phpBB
Яндекс.Метрика